Application imageApplication image

Application

When applying block paving sealant it is always advised to wear protective gloves, vapour resistant mask, goggles, boots and suitable clothing at all times. We recommend applying two coats of block paving sealant leaving at least 2 hours drying time between applications. For borders areas a 4" brush can be used to avoid overspill

APPLICATION OF BLOCK PAVING SEALANT:

Block paving sealants are best applied by a sprayer unit or roller kit. The average optimum rate of coverage, to ensure all joints are properly sealed would be at a rate of 2.5m² per litre first coat, and approx 3.5m² per litre second coat. The two coat technique is the optimum method for long term protection. Once applied the block paving sealant will be dry within 2 hours at 20°C , vehicles should be kept off the sealed area for a minimum of 24 hours at 20°C.

PLEASE NOTE: The times above may be change depending on the ambient temperature on any given day.

Smartseal block paving sealant naturally give many years of protection to the paving, but it is advised to apply a top up coat of block paving sealant every few years. Visit our page on maintainence for more details.

Contact us online if you have questions regarding the application of block paving sealant or for free advice call 0800 988 0348